Converters
Temperature Converter
Temperature Converter is part of Toolspire and is ready as soon as this page loads. You type Celsius. Fahrenheit is C × 9/5 + 32. Kelvin is C + 273.15. The unit converter has many units. This page is only temperature.
On this page
What you can do here
Both targets
Fahrenheit is the headline. Kelvin is in the detail.
The two famous points
Freezing and boiling of water at standard pressure.
Celsius in
To start from Fahrenheit, subtract 32 and multiply by 5/9 yourself, then type the Celsius.
The sequence
How to use the Temperature Converter
- 1
Type 0
You should see 32 °F and 273.15 K.
- 2
Type 100
You should see 212 °F.
- 3
Do not type a unit letter
The box is a number of degrees Celsius.
Worth knowing
- Temperature Converter on Toolspire: 0 °C is 32 °F and 273.15 K.
- 100 °C is 212 °F and 373.15 K.
- Fahrenheit = C × 9/5 + 32. Kelvin = C + 273.15.
- Absolute zero is −273.15 °C. Colder than that is rejected.
Water’s two checkpoints
The Celsius scale puts water’s freezing point at 0 and its boiling point at 100, at standard pressure. Fahrenheit puts those at 32 and 212. The gap of 180 Fahrenheit degrees over 100 Celsius degrees is the 9/5 in the formula. Kelvin shifts Celsius by 273.15 so that 0 K is absolute zero. This page starts from Celsius and prints both.
FAQ
Questions about Temperature Converter
Where does Temperature Converter run?
What is 0 °C in Fahrenheit and kelvin?
What is 100 °C in Fahrenheit?
Can I enter Fahrenheit directly?
Why reject below −273.15?
Keep going
Related tools
Last updated Report a problem or suggest a feature